Samsung SC-01L Combination File Firmware mainly used to recover your Samsung Note 9 Mobile from FRP lock. Also, you can use the latest combination file ROM for advance uses such as DRK Repair, Test Hardware, Remove FRP, and Custom Binary Blocked issue easily.
If your Samsung Note 9 stuck at the pattern, password lock screen, & the factory reset process is not working for you, then download the latest U1, U2, U3, U4, U5 factory binary firmware flash file and install it on your phone.
In the download package, you will get Combination File, Flash Tool to flash, and USB driver. So, check below to download the Official Stock ROM for your mobile.
Make sure, first install the Samsung USB Driver on your computer to avoid flashing errors. It is most important part to communicate between Samsung smartphones or tablets with the PC or Laptop.
Download Samsung Combination Firmware File:
| Combination File Name | Samsung_SC-01L_Combination_FAC_FA81_SC01LOMU0ARH2.zip |
| File Size | 1.2GB |
| Version | U1, U2, U3, U4, U5 |
| How to Flash | Odin Tool |
How to Flash Samsung Combination File:
Make Sure: Before you flash your phone you have at least 40% of remain battery charge on your phone.
- Download & extract the Samsung SC-01L Combination Firmware File on your computer using WinRAR.
- Power off your Samsung Note 9.
- Press & Hold Volume Down + Home button and connect the USB cable at the same time.
- Now the warning logo will appear, press volume up to enter into the Samsung Download Mode.
- Open the Samsung Odin Flasher tool and run odin.exe.
- Click AP/PDA then select the Factory Binary file in the AP tab.
- Now your device will automatically be detected in the Samsung Odin tool.
- Click on the Start button to begin the flashing process.
- Once finished you will see the “Pass” message in the Odin tool.
- That’s it.
- Now disconnect and Power On your phone.
- Make Sure, Combination file not for normal uses, You have to flash the Official firmware file to use the phone in normal mode.