SPD Flash Tool allows you to Flash Stock Firmware (.Pac) on any Smartphone and Tablet powered by Spreadtrum chipsets. In the following topics, we sharing SPD Upgrade Tool all version (2021) to perform Firmware Flashing on any Speedtrum Device. So, if you want to flash or unlock your phone without following any complicated process then you have come to the best place. So, follow these steps and download SPD Upgrade Flash Tool from below.
The flashing process using SPD Upgrade Flash Tool is quite easy, you don’t have to become an expert to use the tool on your PC for flashing your Smartphone. All you have to do is, Just follow the below “How To Use” Instructions without skipping any part.
Also, the SPD Flash tool help to unlock forgotten pattern, password, pin lock from your Oppo & Realme phones, this flashing tool also help you to remove the screen lock. Some times, maybe you can face some error while flashing your phone. So, check here I mentioned all the possible errors which you can face during flashing.
Download SPD Flash Tool all Version (2021)
Check the below links to download the SPD Upgrade Tool, here we have shared every single version of the flash tool so that you can choose the right version for your phone. But, we always recommended you to go with the latest version for better output.
How to use SPD Upgrade Tool:
Make Sure: Before you flash your phone you have at least 40% of remain battery charge on your phone.
- Download & extract the Flash File on your computer using WinRAR.
- Install Qualcomm SPD USB Driver.
- Connect your phone to the computer.
- Power off your Phone.
- Press & Hold the “back key” button and connect the USB cable at the same time.
- Go Device manager ->” Manage” check there It will make a port “SPD USB COM”.
- This means your device is successfully connected to the PC.
- Now open the flash tool folder and run upgrade download.exe.
- On the flash tool click on load packet (gear) icon.
- Now browse and select your phone from the flash file folder.
- Click on Download Content to start (3rd icon).
- wait till finished.
- Once finished, disconnect and power on your Phone.
- This is how you can flash your Phone without facing any error.
More articles:
Thank you