Micromax Q402 Flash File mainly used to recover your Micromax Mobile from hanging on the logo and remove all locks. Somehow, if your Micromax Q402 mobile stuck at the pattern, password lock screen, & the factory reset process is not working, then you can download the official firmware flash file and install the Operating System (OS) again. In the download package, you will get Flash File, Flash Tool to flash, and also USB driver. So, check below to download the Official Stock ROM for your mobile.
Micromax Q402 Firmware is a basic requirement file for flashing a Micromax mobile. If you don’t receive an OTA update or you want to upgrade your phone then use this flash file to flash your phone. But you need an SPD Flash Tool to flash the firmware.
Make sure, first install the SPD USB Driver on your computer to avoid flashing errors. It is most important part to communicate between Qualcomm smartphones or tablets with the PC or Laptop.
Download LYF Flame 3 Flash File:
- SPD Flash tool.
- MMX_Q402_SW_V02_HW_V2.0_20170330
- MMX_Q402_SW_V07_HW_V1.0_20170307
- MMX_Q402_SW_V14_HW_V2.0_20170804
How to Flash Micromax Q402:
Make Sure: Before you flash your phone you have at least 40% of remain battery charge on your phone.
- Download & extract the Micromax Flash File on your computer using WinRAR.
- Install Qualcomm SPD USB Driver.
- Connect your phone to the computer.
- Power off your Micromax Q402.
- Press & Hold the “back key” button and connect the USB cable at the same time.
- Go Device manager ->” Manage” check there It will make a port “SPD USB COM”.
- This means your device is successfully connected to the PC.
- Now open the flash tool folder and run upgrade download.exe.
- On the flash tool click on load packet (gear) icon.
- Now browse and select Micromax Q402 from the flash file folder.
- Click on Download Content to start (3rd icon).
- wait till finished.
- Once finished, disconnect and power on your Micromax Q402.
- This is how you can flash your Micromax Q402 without facing any error.