Intex Aqua 4G Working Firmware Flash File mainly used to recover your Intex Mobile from hanging on the logo and remove all locks. Somehow, if your Intex mobile stuck at the pattern, password lock screen, & the factory reset process is not working, then you can download the official firmware flash file and install the Operating System (OS) again. In the download package, you will get Flash File, Flash Tool to flash, and also USB driver. So, check below to download the Official Stock ROM for your mobile.
Intex Aqua 4G Working Firmware is a basic requirement file for flashing a Intex mobile. If you don’t receive an OTA update or you want to upgrade your phone then use this flash file to flash your phone. But you need an SPD Flash Tool to flash the firmware.
Make sure, first install the SPD USB Driver on your computer to avoid flashing errors. It is most important part to communicate between Qualcomm smartphones or tablets with the PC or Laptop.
Download Intex Aqua 4G Flash File:
How to Flash Intex Aqua 4G Working:
Make Sure: Before you flash your phone you have at least 40% of remain battery charge on your phone.
- Press & Hold Volume UP and Power button and connect the USB cable at the same time.
- Go Device manager ->” Manage” check there It will make a port “Qualcomm HS-USB QDLoader 9008”.
- This means your device is successfully connected to the PC.
- Now open the flash tool folder and install it.
- Then check on the desktop Qflash_Tool_9.1.6 icon will be added.
- On the flash tool click on Browse and select prog_emmc_firehosr.mbn file.
- Click on Load XML and select Raw_program –>> Patch0.xml.
- Click on Download.
- wait till finished.
- Once finished, disconnect and power on your Intex Wind 4S LS5018.
Read More: Intex Aqua Power HD 4G Stock ROM Firmware (Flash File)