Samsung SM-J730GM Flash File mainly used to recover your Samsung J7 Pro Mobile from hang on the logo and remove all locks. Somehow, if your Samsung J7 Pro stuck at the pattern, password lock screen, & the factory reset process is not working, then you can download the official firmware flash file and install the Operating System (OS) again. In the download package, you will get Flash File, Flash Tool to flash, and also USB driver. So, check below to download the Official Stock ROM for your mobile.
Samsung SM-J730GM Firmware is a basic requirement file for flashing a Samsung mobile. If you don’t receive an OTA update or you want to upgrade your phone then use this flash file to flash your phone. But you need a Samsung Flash Tool to flash the firmware.
Make sure, first install the Samsung USB Driver on your computer to avoid flashing errors. It is the most important part to communicate between Samsung smartphones or tablets with the PC or Laptop.
Download Samsung SM-J730GM Flash File:
| File Name | J730GMDXU7CSI2 |
| File Size | 2.6GB |
| Version | U3 |
| How to Flash | Samsung Kies |
| File Name | J730GMDXS6BSC2 |
| File Size | 2.6GB |
| Version | U3 |
| How to Flash | Samsung Kies |
| File Name | J730GMDXU3ARE2 |
| File Size | 2.6GB |
| Version | U3 |
| How to Flash | Samsung Kies |
| File Name | J730GMDXU2AQL1 |
| File Size | 2.6GB |
| Version | U3 |
| How to Flash | Samsung Kies |
| File Name | J730GMODD1AQF7 |
| File Size | 2.6GB |
| Version | U3 |
| How to Flash | Samsung Kies |
How to Flash Samsung SM-J730GM:
Make Sure: Before you flash your phone you have atleast 40% of remain battery charge in your phone.
- Download & extract the Samsung SM-J730GM Flash File on your computer using WinRAR.
- Power off your Samsung J7 Pro.
- Press & Hold Volume Down + Home button and connect the USB cable at the same time.
- Now the warning logo will appear, press volume up to enter into the Samsung Download Mode.
- Open the Samsung Odin Flasher tool and run odin.exe.
- Click on BL button and select the BL file from the flash file folder.
- Click AP/PDA then select the AP file.
- Again click on CP and select CP or Modem file.
- Click CSC and select the CSC file.
- Now your device will automatically be detected in the Samsung Odin tool.
- Click on the Start button to flashing your phone.
- Once finished you will see the “Pass” message in Odin tool.
- That’s it.
- Now disconnect and Power on your phone.
Read More: Samsung SM-J810G Flash File (Stock Firmware ROM)
This is how you can flash Samsung SM-J730GM Flash File (Stock ROM) on your Samsung J7 Pro phone. I hope it helps to fix your phone.